GenericBanner

Oct08

SOLIDWORKS Flow Simulation 2019: Project Parameters

Categories // What's New In SOLIDWORKS

What's New in SOLIDWORKS 2019

With the new Project Parameters for 2019, users will have more flexibility when it comes to controlling their Flow Simulation inputs. See the three project parameters I have created below to drive my thermal simulation.

 Flow1
Figure 1 - Project Parameters
 
 

The first one uses one of the new IF statements along with the variable “t” (for time) to increase from 0 to 100% for the first 60 physical seconds of the simulation. Then it remains at 100% thereafter. The other two parameters I have linked to this first parameter so that they will increase from 0 to 2 Watts and 0 to 10 Watts respectively.

 
Flow2

Figure 2 - Feature located under Tools, Options, Project, Parameters

 

Any simulation field such as this Volume Heat Source can be linked to a finely tuned Project Parameter and then be driven by parameter value.

Flow3

Figure 3 - Heat source linked to a parameter using a table

 

Even goals can be linked to the parameters, so you can monitor the parameter value throughout the simulation.

Flow4

Figure 4 - Goal reads the parameter value

 

You might test out all sorts of other links by using the braces {} surrounding the name of the parameter or goal you are trying to link to. You’ll be surprised by how much flexibility Flow Simulation 2019 gives you to fine-tune your simulation models.